10 Cases for ea ATA Category 1 Shipping Case Type D Oxygen Cyl Free Shipping

Description

For auction ten (10) ATA Compliant
Original cost per each case is well over 00 ea.
Call Wilson Case to check price (800-322-5493).
10 Cases ea total 0.00
Please note the Shipping for there cases is included.
My cost for shipping is approximately  per case
and more for some locations on the West Coast.
Please contact me if you only need 5 as I will split
them (5) for 1/2 of the listed Auction Price.
Specialized Transport Case
This is a
C
ategory
O
ne
T
ransport
C
ase,
C
ustom
M
anufactured by Wilson Case of Nebraska
This Case is Custom Designed for Transport of Two (2) Type "D" Oxygen Cylinders
Although Designed to Transport Oxygen Cylinders t
his
Wilson
C
ase is only limited to the size of equipment
that can safely be packaged in the available compartment
space
The items or Material Shipped must be in compliance with all
regulatory
requirements
in effect
Important Please Read:
There are many agencies both government and private that are involved in establishing the regulations and standards and enforcing compliance. You can rest assured that your Wilson case meets or exceeds those requirements.
It is the buyers responsibility to comply with the regulations regarding the item or equipment they are shipping. Please consult the agency or organization familiar with or that regulates the type of equipment or product you are shipping. To ensure proper labeling and packing requirements are followed.
Exterior approximate dimensions:
Length:   24"
Height:   14"
Width:      8"
Interior compartment dimensions:
Total Depth 21"  (17" To TOP of Foam)
4"  From End of Foam to Case Top
Compartments are 4.5" X 4.5"
Refer to Photos for Personal Fitment
Weight Empty:
22.7 Lbs
The (ATA)
Air Transport Association approval is vital for cases that are intended to ship various types of product and materials that are sensitive to the movement of travel. ATA cases can be used for anything from
Medical
equipment, electronics
as well as specialized Gases
. ATA-300 approval means the casing will withstand the normal to rough handling associated with common carrier shipments for a
Minimum of
100 trips
and more
. With more than 40 years as a leader in the industry, Wilson Case uses experience, creativity, and innovation to design custom ATA flight cases.
Such as the case in this listing.
To simplify the process, the UN has developed a universal system for classification, packaging and labeling of dangerous goods so they can be safely transported and shipped. Most national and international regulations regarding air
base transportation as well as shipment by other means road, rail and seas. Most all are based on the UN specifications. Standards for testing packaging performance are set under Chapter 6.1 of the UN model regulations and cases that
pass the prescribed test qualify to receive a UN seal of approval.
The first rule of ATA Specification 300, Complaint Cases, is they must be able to safely endure a minimum of 100 trips. Other important safeguards required, include but are not limited to.
Exterior and interior case dimensions in accordance with detailed blueprints or plans.
Walls composed of minimum ACX grade cross, multilayered plywood of 1/4 inch, 3/8 inch or 1/2 inch thickness in combination with either ABS hair celled textured plastic laminate, or
pebble
finish, flat tone and aluminum extrusion fittings.
Exterior and interior case dimensions in accordance with detailed blueprints or plans.
Aluminum extrusion fittings made with 6063 alloy with a rating of T-5 and a strength rating 42 kips per square inch
Steel Knuckled Ball Corners, attached permanently by six machine driven still rivets and must also include stacking ball corners.
Steel Piano Type Hinging, to be used for Hinged Lid Designs and Riveting to Bond Upper & Lower Case Halves at every 3 inches across the entire Case Width.
Acceleration and deceleration as well as four and asked pressures can affect cargo during takeoffs and landings. Compression may also be a factor during a difficult or rough landing.
Turbulence: During turbulence, Carl can experience rapid shifts
and vertical movement, alternating between heavy pressure and near weightlessness.
Altitude: R
isks to
cargo increase with gains in altitude. Liquid cargo may become subject to leaks while other cargo may suffer from general increases in cabin pressure.
Temperature: If your cargo may be affected by extremes of heat and/or called, need to package it accordingly. Temperature ranges in flight can vary substantially, often exceeding their normal range of 30
° to 70°F
ahrenheit.
Cargo compartments: Air freighters /
cargo planes
are designed and equipped to transport cargo. However, the bellies of passenger aircraft are often less able to protect cargo from movement during flight. This is how your equipment is being transported, in case you use to ship it needs to compensate for the increased risk.
Cargo
Handling: Large terminals are more likely to have conveyor systems and automated mechanical equipment to safely move luggage and cargo to and from the aircraft. We know as well there is a manual component involved with this operation and the necessary care required when handling both luggage equipment, may sometimes be a little lax. Manual handling, which is typically
with smaller airports can result in damage from over stacking and constant
re positioning
as well as ignored safe handling practices.
Ramps: Cargo may be exposed to weather while in route to and from the loading ramps. To ensure your equipment or personal items. Being weatherproof and water resistant is another one of the ATA requirements.
HERE ARE A FEW GREAT REASONS TO SHOP WITH ME!
1. You may feel confident with your purchase just check my feedback. I have been a member on eBay since 1998.
2. If you have any questions regarding this item please contact me I will respond within 24 hours possibly longer on weekends.
Please remember if for any reason you are not satisfied, you may return your items within the first 30 days.
"Proud eBay Member Since February, 1998"
Terms and Conditions:
Disclaimer- The item(s) is being Sold AS-IS with no warranty/returns implied. Regardless of the origin of the equipment, documentation provided, or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The seller assumes no responsibility for the proper or improper use of the product. The purchaser, by bidding/paying for this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof.
We DO NOT test or certify the equipment being sold for patient use. It is up to the purchaser to meet all requirements and regulation certification processes that deemed necessary per FDA or any other regulatory agencies that may be applicable. If you purchase medical, laboratory or any equipment that will be for PATIENT use and/or diagnosis, it is the BUYERS responsibility to have the equipment certified/licensed, tested or inspected prior to patient use. No exceptions.
By bidding/paying for the item(s) you agree to the following: We (Seller) do not state or imply the usage of the item being sold. Prior to using the item individually or on a patient, you (Buyer) will seek if applicable the manufacturer or your personal/medical care/health care provider for full details on proper usage of the item, instruction for fitting and wearing of an item if applicable, maintenance/operations, care of item, certifications/licensing, and/or any regulatory requirements for the item. You (Buyer) of the item(s) agree to hold the Seller harmless, and release owners, from any damage/liability they(seller) may incur due to the use of the item(s).
Indemnification- Buyer shall indemnify, A PLUS COMPUTERS, MEDICAL & DENTAL
/ DentTiva
Management and its affiliates, and its and their respective directors, officers and employees, harmless from any claims, damages, losses, liabilities, costs and expenses (including, without limitation, reasonable attorney's fees and court costs) arising out of (a) Buyer's breach of any of its obligations, representations or warranties under this Agreement, and (b) any claims that the item(s) infringe upon the intellectual property rights of any third party.
Track Page Views With
Auctiva's FREE Counter